dmesg - Intel Core 2 6400
microcode: microcode updated early to revision 0x5d, date = 2010-10-02
Linux version 6.1.0-18-amd64 ([email protected]) (gcc-12 (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #1 SMP PREEMPT_DYNAMIC Debian 6.1.76-1 (2024-02-01)
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e6000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffaffff] usable
BIOS-e820: [mem 0x000000003ffb0000-0x000000003ffbffff] ACPI data
BIOS-e820: [mem 0x000000003ffc0000-0x000000003ffeffff] ACPI NVS
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] reserved
BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: System manufacturer System Product Name/P5PE-VM, BIOS 0901 08/21/2006
tsc: Fast TSC calibration using PIT
tsc: Detected 2128.007 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x3ffb0 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
RAMDISK: [mem 0x30d5d000-0x346a5fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FAF80 000021 (v02 ACPIAM)
ACPI: XSDT 0x000000003FFB0100 00003C (v01 A M I OEMXSDT 08000621 MSFT 00000097)
ACPI: FACP 0x000000003FFB0290 0000F4 (v03 A M I OEMFACP 08000621 MSFT 00000097)
ACPI: DSDT 0x000000003FFB0400 00358D (v01 A0551 A0551036 00000036 INTL 02002026)
ACPI: FACS 0x000000003FFC0000 000040
ACPI: FACS 0x000000003FFC0000 000040
ACPI: APIC 0x000000003FFB0390 00006C (v01 A M I OEMAPIC 08000621 MSFT 00000097)
ACPI: OEMB 0x000000003FFC0040 00003F (v01 A M I OEMBIOS 08000621 MSFT 00000097)
ACPI: Reserving FACP table memory at [mem 0x3ffb0290-0x3ffb0383]
ACPI: Reserving DSDT table memory at [mem 0x3ffb0400-0x3ffb398c]
ACPI: Reserving FACS table memory at [mem 0x3ffc0000-0x3ffc003f]
ACPI: Reserving FACS table memory at [mem 0x3ffc0000-0x3ffc003f]
ACPI: Reserving APIC table memory at [mem 0x3ffb0390-0x3ffb03fb]
ACPI: Reserving OEMB table memory at [mem 0x3ffc0040-0x3ffc007e]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000003ffaffff]
NODE_DATA(0) allocated [mem 0x3ff85000-0x3ffaffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x000000003ffaffff]
Normal empty
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x000000003ffaffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffaffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 97 pages in unavailable ranges
On node 0, zone DMA32: 80 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x808
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000e5fff]
PM: hibernation: Registered nosave memory: [mem 0x000e6000-0x000fffff]
[mem 0x40000000-0xffb7ffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 61 pages/cpu s212992 r8192 d28672 u524288
pcpu-alloc: s212992 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Fallback order for Node 0: 0
Built 1 zonelists, mobility grouping on. Total pages: 257713
Policy zone: DMA32
Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64", will be passed to user space.
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
Memory: 260860K/1047864K available (14342K kernel code, 2331K rwdata, 9056K rodata, 2792K init, 17412K bss, 131744K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 40188 entries in 157 pages
ftrace: allocated 157 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1eac89bf736, max_idle_ns: 440795251929 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.01 BogoMIPS (lpj=8512028)
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
MMIO Stale Data: Unknown: No mitigations
x86/fpu: x87 FPU will use FXSAVE
Freeing SMP alternatives memory: 36K
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor initialized
TOMOYO Linux initialized
LSM support for eBPF active
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
smpboot: CPU0: Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz (family: 0x6, model: 0xf, stepping: 0x2)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 2 and lim to 1.
Performance Events: PEBS fmt0-, Core2 events, 4-deep LBR, Intel PMU driver.
core: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
signal: max sigframe size: 1440
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (8512.02 BogoMIPS)
node 0 deferred pages initialised in 8ms
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x3ffc0000-0x3ffeffff] (196608 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
pinctrl core: initialized pinctrl subsystem
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1719117219.176:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 1 ACPI AML tables successfully acquired and loaded
ACPI: Dynamic OEM Table Load:
ACPI BIOS Warning (bug): Incorrect checksum in table [SSDT] - 0x78, should be 0x7F (20220331/tbprint-174)
ACPI: SSDT 0xFFFF9B39BAAEC800 0002E3 (v01 AMI CPU1PM 00000001 INTL 20060113)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9B39BAAEF000 0002DA (v01 AMI CPU2PM 00000001 INTL 20060113)
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: Enabled 9 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A03:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI]
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xffefffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: Enabling MCH 'Overflow' Device
pci 0000:00:00.0: [8086:2570] type 00 class 0x060000
pci 0000:00:00.0: reg 0x10: [mem 0xf0000000-0xf3ffffff pref]
pci 0000:00:01.0: [8086:2571] type 01 class 0x060400
pci 0000:00:06.0: [8086:2576] type 00 class 0x088000
pci 0000:00:06.0: reg 0x10: [mem 0xfecf0000-0xfecf0fff]
pci 0000:00:1d.0: [8086:24d2] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
pci 0000:00:1d.1: [8086:24d4] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0xc000-0xc01f]
pci 0000:00:1d.2: [8086:24d7] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0xc400-0xc41f]
pci 0000:00:1d.3: [8086:24de] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0xc800-0xc81f]
pci 0000:00:1d.7: [8086:24dd] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf9fffc00-0xf9ffffff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060400
pci 0000:00:1f.0: [8086:24d0] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH4 GPIO
pci 0000:00:1f.2: [8086:24d1] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:1f.2: reg 0x20: [io 0xfc00-0xfc0f]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:1f.5: [8086:24d5] type 00 class 0x040100
pci 0000:00:1f.5: reg 0x10: [io 0xb400-0xb4ff]
pci 0000:00:1f.5: reg 0x14: [io 0xb000-0xb03f]
pci 0000:00:1f.5: reg 0x18: [mem 0xf9fff800-0xf9fff9ff]
pci 0000:00:1f.5: reg 0x1c: [mem 0xf9fff400-0xf9fff4ff]
pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
pci_bus 0000:01: extended config space not accessible
pci 0000:01:00.0: [10de:0281] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:01:00.0: reg 0x14: [mem 0xf4000000-0xf7ffffff pref]
pci 0000:01:00.0: reg 0x30: [mem 0xfbee0000-0xfbefffff pref]
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf8ffffff pref]
pci_bus 0000:02: extended config space not accessible
pci 0000:02:0d.0: [11ab:4320] type 00 class 0x020000
pci 0000:02:0d.0: reg 0x10: [mem 0xfbffc000-0xfbffffff]
pci 0000:02:0d.0: reg 0x14: [io 0xe800-0xe8ff]
pci 0000:02:0d.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:02:0d.0: supports D1 D2
pci 0000:02:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x40000000-0xffefffff window] (subtractive decode)
ACPI: PCI: Interrupt link LNKA configured for IRQ 10
ACPI: PCI: Interrupt link LNKB configured for IRQ 7
ACPI: PCI: Interrupt link LNKC configured for IRQ 5
ACPI: PCI: Interrupt link LNKD configured for IRQ 3
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKE disabled
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKF disabled
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 11
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3ffb0000-0x3fffffff]
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet: 3 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0400-0x041f] has been reserved
system 00:01: [io 0x0480-0x04bf] has been reserved
system 00:01: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:01: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: [io 0x0290-0x0297] has been reserved
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:07: [mem 0xfff00000-0xffffffff] has been reserved
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
TCP: Hash tables configured (established 8192 bind 8192)
MPTCP token hash table entries: 1024 (order: 2, 24576 bytes, linear)
UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbefffff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf8ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x40000000-0xffefffff window]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xf4000000-0xf8ffffff pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:02: resource 7 [mem 0x40000000-0xffefffff window]
PCI: CLS 16 bytes, default 64
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=18 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 58660K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel 865 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf0000000
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: registered as rtc0
rtc_cmos 00:00: setting system clock to 2024-06-23T04:33:40 UTC (1719117220)
rtc_cmos 00:00: alarms up to one month, 114 bytes nvram, hpet irqs
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
tsc: Refined TSC clocksource calibration: 2127.999 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1eac822addd, max_idle_ns: 440795285886 ns
clocksource: Switched to clocksource tsc
NET: Registered PF_INET6 protocol family
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
mip6: Mobile IPv6
NET: Registered PF_PACKET protocol family
mpls_gso: MPLS GSO support
microcode: sig=0x6f2, pf=0x1, revision=0x5d
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1334626074, 2577719)->(1345594622, -8390829)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1'
Loaded X.509 cert 'Debian Secure Boot Signer 2022 - linux: 14011249c2675ea8e5148542202005810584b25f'
zswap: loaded using pool lzo/zbud
Key type .fscrypt registered
Key type fscrypt-provisioning registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha256
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64 (disabled)
evm: security.SMACK64EXEC (disabled)
evm: security.SMACK64TRANSMUTE (disabled)
evm: security.SMACK64MMAP (disabled)
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2792K
Write protecting the kernel read-only data: 26624k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1184K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=/boot/vmlinuz-6.1.0-18-amd64
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: button: Power Button [PWRF]
skge: 1.14 addr 0xfbffc000 irq 23 chip Yukon-Lite rev 9
skge 0000:02:0d.0 eth0: addr 00:17:31:76:f5:bd
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ACPI: bus type drm_connector registered
skge 0000:02:0d.0 enp2s13: renamed from eth0
ata2.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata2.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: Features: Dev-Sleep
ata2.01: ATAPI: HL-DT-ST BD-RE WH16NS40, 1.05, max UDMA/133
scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 5B0Q PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM HL-DT-ST BD-RE WH16NS40 1.05 PQ: 0 ANSI: 5
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9fffc00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.0-18-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 16, io port 0x0000b800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.0-18-amd64 uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000c000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.0-18-amd64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000c400
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.0-18-amd64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io port 0x0000c800
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 6.1.0-18-amd64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sr 1:0:1:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
ata2.00: Enabling discard_zeroes_data
sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
sr 1:0:1:0: Attached scsi CD-ROM sr0
ata2.00: Enabling discard_zeroes_data
sda: sda1 sda2 < sda5 sda6 sda7 sda8 >
sd 1:0:0:0: [sda] Attached SCSI disk
nouveau 0000:01:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
nouveau 0000:01:00.0: NVIDIA NV28 (028100a1)
nouveau 0000:01:00.0: bios: version 04.28.20.10.00
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart: (udev-worker) tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
agpgart-intel 0000:00:00.0: AGP 3.0 bridge
agpgart: (udev-worker) tried to set rate=x12. Setting to AGP3 x8 mode.
agpgart-intel 0000:00:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: putting AGP V3 device into 8x mode
nouveau 0000:01:00.0: timer: unknown input clock freq
nouveau 0000:01:00.0: fb: 64 MiB SDRAM
nouveau 0000:01:00.0: DRM: VRAM: 63 MiB
nouveau 0000:01:00.0: DRM: GART: 64 MiB
nouveau 0000:01:00.0: DRM: BMP version 5.35
nouveau 0000:01:00.0: DRM: DCB version 2.0
nouveau 0000:01:00.0: DRM: DCB outp 00: 02000310 000088b8
nouveau 0000:01:00.0: DRM: DCB outp 01: 02110302 00000000
nouveau 0000:01:00.0: DRM: DCB outp 02: 01010300 000088b8
nouveau 0000:01:00.0: DRM: DCB outp 03: 01120321 00000002
nouveau 0000:01:00.0: DRM: MM: using M2MF for buffer copies
nouveau 0000:01:00.0: DRM: Saving VGA fonts
nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
usb 3-1: new low-speed USB device number 2 using uhci_hcd
nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x9000, bo (____ptrval____)
fbcon: nouveaudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
nouveau 0000:01:00.0: [drm] fb0: nouveaudrmfb frame buffer device
input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input4
[drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
usb 3-1: New USB device found, idVendor=1c4f, idProduct=0c07, bcdDevice= 1.10
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: SZH
hid: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: SZH USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:1C4F:0C07.0001/input/input5
hid-generic 0003:1C4F:0C07.0001: input,hidraw0: USB HID v1.10 Keyboard [SZH USB Keyboard] on usb-0000:00:1d.1-1/input0
input: SZH USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1C4F:0C07.0002/input/input6
input: SZH USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/0003:1C4F:0C07.0002/input/input7
hid-generic 0003:1C4F:0C07.0002: input,hidraw1: USB HID v1.10 Device [SZH USB Keyboard] on usb-0000:00:1d.1-1/input1
PM: Image not found (code -22)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Quota mode: none.
usb 3-2: new full-speed USB device number 3 using uhci_hcd
Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
usb 3-2: New USB device found, idVendor=1532, idProduct=0084, bcdDevice= 2.00
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Razer DeathAdder V2
usb 3-2: Manufacturer: Razer
input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:1532:0084.0003/input/input8
hid-generic 0003:1532:0084.0003: input,hidraw2: USB HID v1.11 Mouse [Razer Razer DeathAdder V2] on usb-0000:00:1d.1-2/input0
systemd[1]: RTC configured in localtime, applying delta of 180 minutes to system time.
input: Razer Razer DeathAdder V2 Keyboard as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/0003:1532:0084.0004/input/input9
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.1/0003:1532:0084.0004/input/input10
hid-generic 0003:1532:0084.0004: input,hidraw3: USB HID v1.11 Keyboard [Razer Razer DeathAdder V2] on usb-0000:00:1d.1-2/input1
input: Razer Razer DeathAdder V2 as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.2/0003:1532:0084.0005/input/input11
hid-generic 0003:1532:0084.0005: input,hidraw4: USB HID v1.11 Keyboard [Razer Razer DeathAdder V2] on usb-0000:00:1d.1-2/input2
hid-generic 0003:1532:0084.0006: hiddev0,hidraw5: USB HID v1.11 Device [Razer Razer DeathAdder V2] on usb-0000:00:1d.1-2/input3
systemd[1]: Queued start job for default target graphical.target.
systemd[1]: Created slice system-getty.slice - Slice /system/getty.
systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
systemd[1]: Created slice user.slice - User and Session Slice.
systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
systemd[1]: Reached target nss-user-lookup.target - User and Group Name Lookups.
systemd[1]: Reached target remote-fs.target - Remote File Systems.
systemd[1]: Reached target slices.target - Slice Units.
systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
systemd[1]: Listening on systemd-coredump.socket - Process Core Dump Socket.
systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
systemd[1]: Listening on systemd-journald.socket - Journal Socket.
systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
systemd[1]: Starting [email protected] - Load Kernel Module configfs...
systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
systemd[1]: Starting [email protected] - Load Kernel Module drm...
systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
systemd[1]: Starting [email protected] - Load Kernel Module fuse...
systemd[1]: Starting [email protected] - Load Kernel Module loop...
systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
systemd[1]: Starting systemd-journald.service - Journal Service...
systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
loop: module loaded
fuse: init (API version 7.37)
systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module drm.
systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
EXT4-fs (sda8): re-mounted. Quota mode: none.
systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module fuse.
systemd[1]: [email protected]: Deactivated successfully.
systemd[1]: Finished [email protected] - Load Kernel Module loop.
systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
lp: driver loaded but no devices found
systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
ppdev: user-space parallel port driver
systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
systemd[1]: Starting systemd-sysusers.service - Create System Users...
systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
systemd[1]: Started systemd-journald.service - Journal Service.
systemd-journald[222]: Received client request to flush runtime journal.
audit: type=1400 audit(1719106424.724:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=267 comm="apparmor_parser"
audit: type=1400 audit(1719106424.736:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mariadbd_akonadi" pid=268 comm="apparmor_parser"
audit: type=1400 audit(1719106424.744:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="mysqld_akonadi" pid=270 comm="apparmor_parser"
audit: type=1400 audit(1719106424.756:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=271 comm="apparmor_parser"
audit: type=1400 audit(1719106424.756:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=271 comm="apparmor_parser"
audit: type=1400 audit(1719106424.760:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="postgresql_akonadi" pid=272 comm="apparmor_parser"
audit: type=1400 audit(1719106424.788:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/akonadiserver" pid=274 comm="apparmor_parser"
audit: type=1400 audit(1719106424.808:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=275 comm="apparmor_parser"
audit: type=1400 audit(1719106424.808:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=275 comm="apparmor_parser"
audit: type=1400 audit(1719106424.808:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=275 comm="apparmor_parser"
sd 1:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:1:0: Attached scsi generic sg1 type 5
random: crng init done
ACPI Warning: \_PR.CPU1._PSS: SubPackage[8,9] - suspicious power dissipation values (20220331/nsrepair2-684)
ACPI Warning: \_PR.CPU2._PSS: SubPackage[8,9] - suspicious power dissipation values (20220331/nsrepair2-684)
Adding 1951740k swap on /dev/sda7. Priority:-2 extents:1 across:1951740k SSFS
intel_rng: FWH not detected
input: PC Speaker as /devices/platform/pcspkr/input/input12
iTCO_vendor_support: vendor-support=0
iTCO_wdt iTCO_wdt.1.auto: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
platform coretemp.0: Using relative temperature scale!
platform coretemp.0: Using relative temperature scale!
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
skge 0000:02:0d.0 enp2s13: enabling interface
snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 61385 usecs (2956 samples)
snd_intel8x0 0000:00:1f.5: clocking to 48000
NET: Registered PF_QIPCRTR protocol family
skge 0000:02:0d.0 enp2s13: Link is up at 1000 Mbps, full duplex, flow control both
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s13: link becomes ready
process '/root/Geekbench-5.3.0-Linux/geekbench_x86_64' started with executable stack
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3146 > 3142), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3948 > 3932), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4945 > 4935), lowering kernel.perf_event_max_sample_rate to 40250
perf: interrupt took too long (6257 > 6181), lowering kernel.perf_event_max_sample_rate to 31750
perf: interrupt took too long (7870 > 7821), lowering kernel.perf_event_max_sample_rate to 25250
perf: interrupt took too long (9871 > 9837), lowering kernel.perf_event_max_sample_rate to 20250